HelloXR50 Wankel XR50 Wankel engine When XR50 Wankel engine is a rotary engine , the Wankel the system operates on. The Wankel engine is a 4-stroke naturally aspirated engine that has no reciprocating masses, but rather an eccentric rotating runner has to. The rotor turns at 1 / 3 the speed of the eccentric shaft and lights for each revolution of the eccentric one of the three chambers. The advantage of the Wankel engine is the absence of vibrations through the balanced rotating mass, the very compact design and extreme power delivery with a very favorable torque curve with the lowest emissions (see rating chart). Today's rotary engines achieve tremendous mileage.They are therefore mainly in small, partially unmanned aircraft use. The rotary engine consists essentially of the following:  Performance chart of the Wankel engine Aixro XR50
The XR-50 is a carburetor engine with a lubricating mixture in a ratio of 40:1. In contrast to a 2-stroke engine burns the oil residue. The fresh gas flow through a side window first, before they arrive in the axial direction through the rotor in the opposite side window, from where they then flow into the combustion chamber. In this manner, rotor, bearing and eccentric shaft are lubricated and cooled. At about 5500 1/min opens with a vacuum-controlled throttle valve of the split intake duct, the supply of fresh gases into the combustion chamber also directly manages the. The cold fresh gases cause the enormous power of the XR-50 . The special procedures in the engine with long valve timing are very good emission values achieved, the cycle in part under 1% of a comparable 2-stroke engine and are best 4-stroke level reached. --- On Mon, 12/20/10, b d <gpabruce@gmail.com> wrote:
|
__._,_.___
No comments:
Post a Comment